MSDS

Product Name: HydroForce® Stainless Steel Cleaner & Polish (aerosol)
Product Number (s): 14424, 74424
Page 3 of 7
or limited air circulation area, clean-up workers should wear appropriate
respiratory protection. Recover or absorb spilled material using an absorbent
designed for chemical spills. Place used absorbents into proper waste
containers.
Section 7: Handling and Storage
Handling Procedures: Wash hands after using and before consuming food. Use caution around energized equipment.
The metal container will conduct electricity if it contacts a live source. This may result in injury to
the user from electrical shock and/or flash fire. For product use instructions, please see the
product label.
Storage Procedures: Store in a cool dry area out of direct sunlight. Aerosol cans must be maintained below 120 F to
prevent cans from rupturing. Store out of reach of children.
Aerosol Storage Level: I
Section 8: Exposure Controls/Personal Protection
Exposure Guidelines:
OSHA ACGIH
OTHER
COMPONENT TWA STEL TWA STEL TWA SOURCE UNIT
Water NE NE NE NE NE
Hydrotreated light distillate NE NE NE NE NE
White mineral oil 5 NE 5 10 NE mg/m
3
Surfactant blend NE NE NE NE NE
Liquefied petroleum gas 1000 NE 1000 NE NE ppm
N.E. – Not Established (c) – ceiling (s) – skin (v) – vacated
Controls and Protection:
Engineering Controls: Area should have ventilation to provide fresh air. Local exhaust ventilation is generally
preferred because it can control the emissions of the contaminant at the source, preventing
dispersion into the general work area. Use mechanical means if necessary to maintain vapor
levels below the exposure guidelines. If working in a confined space, follow applicable OSHA
regulations.
Respiratory Protection: None required for normal work where adequate ventilation is provided. If engineering controls
are not feasible or if exposure exceeds the applicable exposure limits, use a NIOSH-approved
cartridge respirator with organic vapor cartridge. Air monitoring is needed to determine actual
employee exposure levels. Use a self-contained breathing apparatus in confined spaces and
for emergencies.
Eye/face Protection: For normal conditions, wear safety glasses. Where there is reasonable probability of liquid
contact, wear splash-proof goggles.
Skin Protection: Use protective gloves such as nitrile or PVC. Also, use full protective clothing if there is
prolonged or repeated contact of liquid with skin.
Section 9: Physical and Chemical Properties
Physical State: liquid