MSDS

Product Name: HydroForce® Stainless Steel Cleaner & Polish (aerosol)
Product Number (s): 14424, 74424
Page 2 of 7
Section 3: Composition/Information on Ingredients
COMPONENT CAS NUMBER % by Wt.
Water 7732-18-5 55 - 65
Hydrotreated light distillate 64742-47-8 15 – 25
White mineral oil 8042-47-5 5 - 10
Surfactant blend proprietary 5 - 10
Liquefied petroleum gas 68476-86-8 5 - 10
Section 4: First Aid Measures
Eye Contact: Immediately flush with plenty of water for 15 minutes. Call a physician if irritation persists.
Skin Contact: Remove contaminated clothing and wash affected area with soap and water. Call a physician if
irritation persists. Wash contaminated clothing prior to re-use.
Inhalation: Remove person to fresh air. Keep person calm. If not breathing, give artificial respiration. If
breathing is difficult give oxygen. Call a physician.
Ingestion: Do NOT induce vomiting. Call a doctor or poison control center. Keep victim calm.
Note to Physicians: Treat symptomatically.
Section 5: Fire-Fighting Measures
Flammable Properties:
This product is nonflammable in accordance with aerosol flammability definitions.
(See 16 CFR 1500.3(c)(6) ).
Flash Point:
None Upper Explosive Limit: ND
Autoignition Temperature: ND Lower Explosive Limit: ND
Fire and Explosion Data:
Suitable Extinguishing Media: Use Class B extinguishers or an extinguishing agent appropriate for the surrounding fire.
Products of Combustion: Oxides of carbon
Explosion Hazards: Aerosol containers, when exposed to heat from fire, may build pressure and explode.
Protection of Fire-Fighters: Firefighters should wear self-contained, NIOSH-approved breathing apparatus for
protection against suffocation and possible toxic decomposition products. Proper eye and
skin protection should be provided. Use water spray to keep fire-exposed containers cool
and to knock down vapors which may result from product decomposition.
Section 6: Accidental Release Measures
Personal Precautions: Use personal protection recommended in Section 8.
Environmental Precautions: Take precautions to prevent contamination of ground and surface waters. Do not flush into
sewers or storm drains.
Methods for Containment & Clean-up: Dike area to contain spill. Ventilate the area with fresh air.
If in confined space or