Safety data sheet

Safety Data Sheet
Regulation EC No 1907/2006 Art.31
Productname :
PRO PAINT
Creationdate :
28.05.14 Version : 1.0
Ref.Nr.:
BDS000838_3_20140528 (EN)
Replaces:
BDS000838_20120323
CRC Industries Europe bvba
Touwslagerstraat 1, 9240 Zele – Belgium
Tel (+32) (0) 52 / 45 60 11 – Fax (+32) (0) 52 / 45 00 34 – www.crcind.com
6 / 10
National established exposure limits, United Kingdom
dimethyl ether
115-10-6
TWA
400 ppm
STEL
500 ppm
xylene
1330-20-7
TWA
50 ppm
STEL
100 ppm
8.2. Exposure controls
Control procedures :
Ensure adequate ventilation
Keep away from heat and sources of ignition
Take precautionary measures against static discharges
Personal protection :
Take precautions to avoid contact with skin and eyes when handling the
product.
Ensure adequate ventilation
inhalation :
In case of insufficient ventilation, wear suitable respiratory equipment.
Air purifying respirator equiped with organic gas/vapor cartridge (type A or AX)
hands and skin :
Wear suitable protective gloves against chemicals
(polyvinylalcohol)
eyes :
Wear eye protection/face protection.
Environmental protection:
Avoid release to the environment.
Collect spillage.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
(for aerosols data for the product without propellant)
Apperance : physical state :
DME propelled liquid.
colour :
Colorless.
odour :
Solvent.
pH :
Not applicable.
Boiling point/range :
Not available.
Flash point :
< 0 °C
Evaporation rate :
Not available.
Explosion limits : upper limit :
18.6 %
lower limit :
0.7 %
Vapour pressure :
400 kPa (@ 20°C).
Relative density :
0.76 g/cm3.
Solubility in water :
Insoluble in water
Auto-ignition :
> 250 °C
Viscosity :
Not available.
9.2. Other information
VOC:
666 g/l
SECTION 10: Stability and reactivity