Data Sheet

Technical data sheet
ROST FLASH
Reference : 10526
Manufactured by :
CRC Industries Europe bvba
Touwslagerstraat 1
9240 Zele Belgium
Tél.: [phone] Fax : [phone]
www.crcind.com
2/2
4. Directions
• Remove most of the loose dirt with a wire brush.
• Spray liberally and allow to run off.
• Use extension tube for more precise application.
• Spray from a short distance.
• Allow a few minutes for good penetration.
• Repeat if necessary.
• To remove residues or excess product, use one of the CRC cleaners.
• A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is
available for all CRC products.
5. Typical product data (without propellant)
Appearance Liquid
Color amber
Odour Characteristic odor
Density 0.75 g/cm3 (@ 20°C)
Flash Point < 0 °C
6. Packaging
Aerosol 12x500 ML
All statements in this publication are based on service experience and/or laboratory testing. Because of the wide variety of equipment,
conditions of use and the unpredictable human factors involved, we recommend that our products are tested on-the-job prior to use. All
information is given in good faith but without warranty neither expressed nor implied. This Technical Data Sheet may already have
been revised as a result of a change in legislation, availability of components or newly acquired experiences. The latest and only valid
version of this Technical Data Sheet will be sent to you upon simple request or can be found on our website: www.crcind.com
We
recommend that you register on our website for this product, thus enabling you to automatically receive any future updates.
Version
CRC_GREEN-ROST_FLASH_IND-20090619
Date 19/06/2009