Data Sheet

Technical data sheet
ECO Leak Finder
Reference : 10450
Manufactured by :
CRC Industries Europe bvba
Touwslagerstraat 1
9240 Zele Belgium
Tél.: [phone] Fax : [phone]
www.crcind.com
2/1
4. Directions
• Apply a thin even film.
• Bubbles will appear at the precise location of the leak.
• When used on plastic, copper or oxygen systems, product residues should be washed away with water.
• Do not use on energized equipment.
• A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available
for all CRC products.
5. Typical product data (without propellant)
Aerosol Bulk
Appearance Not available. Liquid.
Color Colorless. Colorless.
Odor Neutral. Odorless.
Density 0.999 g/cm3 (@ 20°C). 1.01 g/cm3 (@ 20°C).
Flash Point None None
pH 7.76 7.0
Storage comment do not store < 0° DO NOT STORE < 0°C
Surface tension active product Not available. 27 mN/m
NSF registration Not available. 142802 Cat P1
6. Packaging
Aerosol 12x500 ML Ref. : 10732
Bulk 2x5 L Ref. : 30058
7. Remarks
Product may separate at lower temperatures.After thawing product can be reconditioned by shaking.
All statements in this publication are based on service experience and/or laboratory testing. Because of the wide variety of equipment,
conditions of use and the unpredictable human factors involved, we recommend that our products are tested on-the-job prior to use. All
information is given in good faith but without warranty neither expressed nor implied. This Technical Data Sheet may already have been
revised as a result of a change in legislation, availability of components or newly acquired experiences. The latest and only valid version of
this Technical Data Sheet will be sent to you upon simple request or can be found on our website: www.crcind.com
We recommend that
you register on our website for this product, thus enabling you to automatically receive any future updates.
Version
CRC_GREEN-LEAKFINDER-20141211
Date