Safety data sheet

Safety Data Sheet
Regulation EC No 1907/2006 Art.31
Productname :
COPPER PASTE
Creationdate :
29.06.17 Version : 1.0
Ref.Nr.:
BDS001991_3_20170629 (EN)
Replaces:
CRC Industries Europe bvba
Touwslagerstraat 1, 9240 Zele – Belgium
Tel (+32) (0) 52 / 45 60 11 – Fax (+32) (0) 52 / 45 00 34 – www.crcind.com
5 / 9
It is good practice to wear gloves and to provide adequate ventilation whenever
using the product.
In all cases handle and use the product in accordance with good industrial
hygiene practices.
inhalation :
Not necessary in normal use.
hands and skin :
If handled correctly skin exposure will be accidental. In such case the use of
disposable gloves should be sufficient provided they are changed immediately
after a splash or spill may occur. If intentional contact is expected reusable
gloves should be used with a breakthrough time greater than the total duration
of the product use.
Recommended gloves:
Nitrile
eyes :
Wear safety eyewear according to EN 166.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Apperance : physical state :
Paste.
colour :
Copper.
odour :
Characteristic odor.
pH :
Not applicable.
Boiling point/range :
Not available.
Flash point :
> 250 °C
Evaporation rate :
Not available.
Explosion limits : upper limit :
Not available.
lower limit :
Not available.
Vapour pressure :
Not available.
Relative density :
0.99 g/cm3 (@ 20°C).
Solubility in water :
Insoluble in water
Auto-ignition :
> 200 °C
Viscosity :
Not available.
9.2. Other information
VOC = volatile organic
compounds
0 g/l
SECTION 10: Stability and reactivity
10.1. Reactivity
No hazardous reactions known if used for its intended purpose
10.2. Chemical stability
Stable
10.3. Possibility of hazardous reactions