SDS

US. ACGIH Threshold Limit Values
ValueComponents Type
TWA 400 ppm
US. NIOSH: Pocket Guide to Chemical Hazards
ValueComponents Type
TWA 590 mg/m3Acetone (CAS 67-64-1)
250 ppm
STEL 54000 mg/m3Carbon dioxide (CAS
124-38-9)
30000 ppm
TWA 9000 mg/m3
5000 ppm
TWA 1050 mg/m3Cyclohexane (CAS
110-82-7)
300 ppm
TWA 1600 mg/m3Methylcyclohexane (CAS
108-87-2)
400 ppm
Ceiling 1800 mg/m3n-Heptane (CAS 142-82-5)
440 ppm
TWA 350 mg/m3
85 ppm
Biological limit values
ACGIH Biological Exposure Indices
ValueComponents Determinant Specimen Sampling Time
50 mg/l Acetone Urine
*
Acetone (CAS 67-64-1)
* - For sampling details, please see the source document.
Appropriate engineering
controls
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level. Provide
eyewash station.
Individual protection measures, such as personal protective equipment
Eye/face protection
Wear safety glasses with side shields (or goggles).
Skin protection
Hand protection
Wear protective gloves such as: Nitrile. Polyvinyl alcohol (PVA). Viton®.
Other
Wear appropriate chemical resistant clothing.
Respiratory protection
In case of insufficient ventilation, wear suitable respiratory equipment. Air monitoring is needed to
determine actual employee exposure levels.
Thermal hazards
Wear appropriate thermal protective clothing, when necessary.
General hygiene
considerations
When using, do not eat, drink or smoke. Always observe good personal hygiene measures, such
as washing after handling the material and before eating, drinking, and/or smoking. Routinely
wash work clothing and protective equipment to remove contaminants.
9. Physical and chemical properties
Appearance
Physical state
Liquid.
Form
Aerosol.
Color
Clear. Colorless.
Odor
Solvent.
Odor threshold
Not available.
pH
Not available.
Melting point/freezing point
-195.9 °F (-126.6 °C) estimated
Initial boiling point and boiling
range
132.9 °F (56.1 °C) estimated
Flash point
< 0 °F (< -17.8 °C) Tag Closed Cup
Evaporation rate
Fast.
Flammability (solid, gas)
Not available.
4 / 9
Material name: Brakleen® Non-Chlorinated Brake Parts Cleaner
1809 Version #: 01 Issue date: 03-04-2014
SDS US