SDS

Precautionary statement
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read
and understood. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not
spray on an open flame or other ignition source. Do not apply while equipment is energized.
Pressurized container: Do not pierce or burn, even after use. Extinguish all flames, pilot lights
and heaters. Vapors will accumulate readily and may ignite. Use only with adequate ventilation;
maintain ventilation during use and until all vapors are gone. Open doors and windows or use
other means to ensure a fresh air supply during use and while product is drying. If you experience
any symptoms listed on this label, increase ventilation or leave the area. Do not breathe gas. Do
not breathe mist or vapor. Wear protective gloves/protective clothing/eye protection/face
protection. Avoid release to the environment.
Response
If swallowed: Immediately call a poison center/doctor. Do NOT induce vomiting. If inhaled:
Remove person to fresh air and keep comfortable for breathing. Call a poison center/doctor if you
feel unwell. If exposed or concerned: Get medical attention. Collect spillage.
Storage
Store in a well-ventilated place. Store locked up. Protect from sunlight. Do not expose to
temperatures exceeding 50°C/122°F. Exposure to high temperature may cause can to burst.
Disposal
Dispose of contents/container in accordance with local/regional/national regulations.
Hazard(s) not otherwise
classified (HNOC)
Static accumulating flammable liquid can become electrostatically charged even in bonded and
grounded equipment. Sparks may ignite liquid and vapor. May cause flash fire or explosion.
3. Composition/information on ingredients
Mixtures
CAS number %Common name and synonymsChemical name
64742-49-0
60 - 70
Naphtha (petroleum), hydrotreated
light
HFC- 152a 75-37-6
20 - 30
1,1-Difluoroethane
110-54-3
3 - 5
n-Hexane
540-84-1
1 - 3
2,2,4-Trimethylpentane
67-63-0
1 - 3
Isopropyl alcohol
75-83-2
< 0.2
2,2-Dimethylbutane
107-83-5
< 0.2
2-Methylpentane
Specific chemical identity and/or percentage of composition has been withheld as a trade secret.
4. First-aid measures
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON
CENTER or doctor/physician if you feel unwell.
Inhalation
Rinse skin with water/shower. Get medical attention if irritation develops and persists.
Skin contact
Rinse with water. Get medical attention if irritation develops and persists.
Eye contact
Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. If
vomiting occurs, keep head low so that stomach content doesn't get into the lungs.
Ingestion
May cause drowsiness and dizziness. Headache. Nausea, vomiting. Aspiration may cause
pulmonary edema and pneumonitis. Prolonged exposure may cause chronic effects.
Most important
symptoms/effects, acute and
delayed
Provide general supportive measures and treat symptomatically. Keep victim under observation.
Symptoms may be delayed.
Indication of immediate
medical attention and special
treatment needed
IF exposed or concerned: Get medical advice/attention. Ensure that medical personnel are aware
of the material(s) involved, and take precautions to protect themselves. Show this safety data
sheet to the doctor in attendance.
General information
5. Fire-fighting measures
Water fog. Foam. Carbon dioxide (CO2). Dry chemical powder, carbon dioxide, sand or earth may
be used for small fires only.
Suitable extinguishing media
None known.
Unsuitable extinguishing
media
2 / 10
Material name: QD® Contact Cleaner
02130 Version #: 02 Revision date: 09-28-2015 Issue date: 09-29-2014
SDS US