MSDS

Product Name: QD® Contact Cleaner (Aerosol)
Product Number (s): 02130, 02130-6
Page 2 of 6
Section 3: Composition/Information on Ingredients
COMPONENT CAS NUMBER % by Wt.
Hexane isomers various 60 - 70
n-Hexane 110-54-3 4.8
Synthetic isoparaffinic hydrocarbon 64741-66-8 5 - 10
Methanol 67-56-1 < 1
1,1-Difluoroethane (HFC-152a) 75-37-6 20 - 30
Section 4: First Aid Measures
Eye Contact:
Immediately flush with plenty of water for 15 minutes. Call a physician if irritation persists.
Skin Contact:
Remove contaminated clothing and wash affected area with soap and water. Call a physician
if irritation persists. Wash contaminated clothing prior to re-use.
Inhalation:
Remove person to fresh air. Keep person calm. If not breathing, give artificial respiration. If
breathing is difficult give oxygen. Call a physician.
Ingestion:
DO NOT induce vomiting. Contact a physician immediately.
Note to Physicians:
Treat symptomatically. Gastric lavage using a cuffed endotracheal tube may be performed at
your discretion.
Section 5: Fire-Fighting Measures
Flammable Properties: This product is extremely flammable in accordance with aerosol flammability
definitions (16 CFR 1500.3(c)(6) ).
Flash Point: < 0 F (TCC) Upper Explosive Limit: 9.0
Autoignition Temperature: 489 F Lower Explosive Limit: 1.7
Suitable Extinguishing Media:
Class B fire extinguishers, dry chemical, foam or CO2
Products of Combustion:
fumes, smoke and carbon monoxide
Protection of Fire-Fighters:
Firefighters should wear self-contained, NIOSH-approved breathing apparatus for
protection against suffocation and possible toxic decomposition products. Proper eye
and skin protection should be provided. Use water fog or spray to keep fire-exposed
containers cool and to knock down vapors which may result from product
decomposition. Do not spray water directly on fire; product will float and could be
reignited on surface of water.
Section 6: Accidental Release Measures
Personal Precautions:
Use personal protection recommended in Section 8.