MSDS

Product Name: 2-26® Multi-Purpose Precision Lubricant (aerosol)
Product Number (s): 02004, 02005, 02024, 72005
Section 3: Composition/Information on Ingredients
COMPONENT CAS NUMBER % by Wt.
Isoparaffinic hydrocarbon 64742-47-8 65 – 75
White mineral oil 8042-47-5 15 – 25
Corrosion inhibitor blend proprietary 5 – 15
Carbon dioxide 124-38-9 1 – 5
Section 4: First Aid Measures
Eye Contact: Immediately flush with plenty of water for 15 minutes. Call a physician if irritation persists.
Skin Contact: Remove contaminated clothing and wash affected area with soap and water. Call a physician if
irritation persists. Wash contaminated clothing prior to re-use.
Inhalation: Remove person to fresh air. Keep person calm. If not breathing, give artificial respiration. If
breathing is difficult give oxygen. Call a physician.
Ingestion: If swallowed, do NOT induce vomiting. Keep at rest. Get prompt medical attention.
Note to Physicians: This product may pose as an aspiration hazard.
Section 5: Fire-Fighting Measures
Flammable Properties:
This product is flammable in accordance with aerosol flammability definitions.
(See 16 CFR 1500.3(c)(6) ).
Flash Point: 192°F / 89°C (TCC) Upper Explosive Limit: 5.0
Autoignition Temperature: ND Lower Explosive Limit: 0.7
Fire and Explosion Data:
Suitable Extinguishing Media: Foam, dry chemical, or water spray
Products of Combustion: Oxides of carbon
Explosion Hazards: Aerosol containers, when exposed to heat from fire, may build pressure and explode. Vapors
may accumulate in a confined space and create a flammable atmosphere.
Protection of Fire-Fighters: Firefighters should wear self-contained, NIOSH-approved breathing apparatus for
protection against suffocation and possible toxic decomposition products. Proper eye and
skin protection should be provided. Use water spray to keep fire-exposed containers cool
and to knock down vapors which may result from product decomposition.
Section 6: Accidental Release Measures
Personal Precautions: Use personal protection recommended in Section 8.
Environmental Precautions: Take precautions to prevent contamination of ground and surface waters. Do not flush into
sewers or storm drains.
Methods for Containment & Clean-up: Dike area to contain spill. Ventilate the area with fresh air. If in confined space
Page 2 of 7