SDS
Eliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area). Keep
combustibles (wood, paper, oil, etc.) away from spilled material. Collect spillage. This material is
classified as a water pollutant under the Clean Water Act and should be prevented from
contaminating soil or from entering sewage and drainage systems which lead to waterways. Stop
the flow of material, if this is without risk. Wipe up with absorbent material (e.g. cloth, fleece).
Clean surface thoroughly to remove residual contamination. Put material in suitable, covered,
labeled containers. For waste disposal, see section 13 of the SDS.
'$%
%0")
Avoid release to the environment. Inform appropriate managerial or supervisory personnel of all
environmental releases. Prevent further leakage or spillage if safe to do so. Do not contaminate
water. Avoid discharge into drains, water courses or onto the ground.
.%)"
?00
Obtain special instructions before use. Do not handle until all safety precautions have been read
and understood. Pressurized container: Do not pierce or burn, even after use. Use with adequate
ventilation. Open doors and windows or use other means to ensure a fresh air supply during use
and while product is drying. If you experience any symptoms listed on this label, increase
ventilation or leave the area. Do not use if spray button is missing or defective. Do not spray on a
naked flame or any other incandescent material. Do not smoke while using or until sprayed surface
is thoroughly dry. Do not cut, weld, solder, drill, grind, or expose containers to heat, flame, sparks,
or other sources of ignition. Use caution around energized equipment. The metal container will
conduct electricity if it contacts a live source. This may result in injury to the user from electrical
shock and/or flash fire. Avoid breathing mist or vapor. Avoid contact with eyes, skin, and clothing.
Avoid prolonged exposure. Should be handled in closed systems, if possible. Use only in
well-ventilated areas. Wear appropriate personal protective equipment. Avoid release to the
environment. Do not empty into drains. Observe good industrial hygiene practices. For product
usage instructions, see the product label.
"$0
Level 1 Aerosol.
Contents under pressure. Do not handle or store near an open flame, heat or other sources of
ignition. Do not puncture or incinerate container. Do not expose to heat or store at temperatures
above 49 °C/120 °F. Protect from sunlight. Store in a well-ventilated place. Store in cool place.
Exposure to high temperature may cause can to burst. Store away from incompatible materials
(see Section 10 of the SDS).
0:
"0+%)*
@8)"())
#")8)"%
The following constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure limit.
At this time, the other constituents have no known exposure limits.
<#*A4%%1 & BBBB2
C"%) +)
PEL 9000 mg/m3carbon dioxide (CAS
124-38-9)
5000 ppm
<#*A1 & BBBB2
C"%) +)
Ceiling 200 ppmtetrachloroethylene (CAS
127-18-4)
TWA 100 ppm
<-$$4%C"
C"%) +)
STEL 30000 ppmcarbon dioxide (CAS
124-38-9)
TWA 5000 ppm
STEL 100 ppmtetrachloroethylene (CAS
127-18-4)
TWA 25 ppm
<6#,-"$%!
C"%) +)
STEL 54000 mg/m3carbon dioxide (CAS
124-38-9)
3 / 9
Material name: Brakleen® Brake Parts Cleaner - 29 oz
No. 05089PS (Item# 1008012) Version #: 02 Revision date: 04-03-2019 Issue date: 03-12-2019
SDS US