SDS

Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level. Eye
wash facilities and emergency shower should be available when handling this product.
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Wear safety glasses with side shields (or goggles).
Eye/face protection
Skin protection
Wear protective gloves such as: Nitrile. Neoprene. Polyvinyl alcohol (PVA).
Hand protection
Wear appropriate chemical resistant clothing.
Other
If engineering controls are not feasible or if exposure exceeds the applicable exposure limits, use a
NIOSH-approved cartridge respirator with an organic vapor cartridge. Use a self-contained
breathing apparatus in confined spaces and for emergencies. Air monitoring is needed to
determine actual employee exposure levels.
Respiratory protection
Wear appropriate thermal protective clothing, when necessary.
Thermal hazards
When using do not smoke. Keep away from food and drink. Always observe good personal
hygiene measures, such as washing after handling the material and before eating, drinking, and/or
smoking. Routinely wash work clothing and protective equipment to remove contaminants.
General hygiene
considerations
9. Physical and chemical properties
Appearance
Liquid.
Physical state
Aerosol.
Form
Clear.
Color
Solvent.
Odor
Odor threshold
Not available.
pH
Not available.
Melting point/freezing point
-195.9 °F (-126.6 °C) estimated
Initial boiling point and boiling
range
132.9 °F (56.1 °C) estimated
Flash point
< 0 °F (< -17.8 °C) Tag Closed Cup
Evaporation rate
Fast.
Not available.
Flammability (solid, gas)
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
1.1 % estimated
Flammability limit - upper
(%)
36 % estimated
Vapor pressure
5157.4 hPa estimated
Vapor density
> 1 (air = 1)
Relative density
0.84 estimated
Solubility (water)
Slightly soluble.
Partition coefficient
(n-octanol/water)
Not available.
Auto-ignition temperature
539.6 °F (282 °C) estimated
Decomposition temperature
Not available.
Viscosity (kinematic)
Not available.
Percent volatile
91.2 % estimated
10. Stability and reactivity
The product is stable and non-reactive under normal conditions of use, storage and transport.
Reactivity
Material is stable under normal conditions.
Chemical stability
No dangerous reaction known under conditions of normal use.
Possibility of hazardous
reactions
6 / 12
Material name: Brakleen® Brake Parts Cleaner - Non-Chlorinated
05084 Version #: 03 Revision date: 12-17-2015 Issue date: 04-28-2015
SDS US