SDS

7. Handling and storage
Obtain special instructions before use. Do not handle until all safety precautions have been read
and understood. Minimize fire risks from flammable and combustible materials (including
combustible dust and static accumulating liquids) or dangerous reactions with incompatible
materials. Pressurized container: Do not pierce or burn, even after use. Do not use if spray button
is missing or defective. Do not spray on a naked flame or any other incandescent material. Do not
smoke while using or until sprayed surface is thoroughly dry. Do not cut, weld, solder, drill, grind,
or expose containers to heat, flame, sparks, or other sources of ignition. Use caution around
energized equipment. The metal container will conduct electricity if it contacts a live source. This
may result in injury to the user from electrical shock and/or flash fire. Do not breathe mist or vapor.
Avoid contact with eyes, skin, and clothing. Avoid prolonged exposure. Do not taste or swallow.
When using, do not eat, drink or smoke. Pregnant or breastfeeding women must not handle this
product. Use only outdoors or in a well-ventilated area. Wear appropriate personal protective
equipment. Wash hands thoroughly after handling. Observe good industrial hygiene practices.
Avoid release to the environment. Wash contaminated clothing before reuse. For product usage
instructions, please see the product label.
Precautions for safe handling
Level 3 Aerosol.
Pressurized container. Protect from sunlight and do not expose to temperatures exceeding
50°C/122 °F. Do not puncture, incinerate or crush. Do not handle or store near an open flame,
heat or other sources of ignition. This material can accumulate static charge which may cause
spark and become an ignition source. Avoid spark promoters. These alone may be insufficient to
remove static electricity. Store in a well-ventilated place. Store away from incompatible materials
(see Section 10 of the SDS).
Conditions for safe storage,
including any incompatibilities
8. Exposure controls/personal protection
Occupational exposure limits
US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)
ValueComponents Type
PEL 2400 mg/m3Acetone (CAS 67-64-1)
1000 ppm
PEL 9000 mg/m3Carbon dioxide (CAS
124-38-9)
5000 ppm
PEL 1050 mg/m3Cyclohexane (CAS
110-82-7)
300 ppm
PEL 260 mg/m3Methanol (CAS 67-56-1)
200 ppm
PEL 2000 mg/m3Methylcyclohexane (CAS
108-87-2)
500 ppm
PEL 2000 mg/m3n-Heptane (CAS 142-82-5)
500 ppm
US. OSHA Table Z-2 (29 CFR 1910.1000)
ValueComponents Type
Ceiling 300 ppmToluene (CAS 108-88-3)
TWA 200 ppm
US. ACGIH Threshold Limit Values
ValueComponents Type
STEL 500 ppm3-Methylhexane (CAS
589-34-4)
TWA 400 ppm
STEL 500 ppmAcetone (CAS 67-64-1)
TWA 250 ppm
STEL 30000 ppmCarbon dioxide (CAS
124-38-9)
TWA 5000 ppm
TWA 100 ppmCyclohexane (CAS
110-82-7)
STEL 250 ppmMethanol (CAS 67-56-1)
TWA 200 ppm
4 / 12
Material name: Brakleen® Brake Parts Cleaner - Non-Chlorinated
05084 Version #: 03 Revision date: 12-17-2015 Issue date: 04-28-2015
SDS US