Instruction manual

VFX 5112/5212 Technical Specifications:
OUTPUT POWER RATING 50Watts RMS @ 5 % THD 16 ohm load 120 VAC
SIGNAL TO NOISE RATIO 70dB Typical
GAIN Channel A: 62 dB
Channel B: 98 dB
EQ - CH. A Treble: 30dB range @ 10kHz
Mid: 6dB range @ 600Hz
Low: 30dB range @ 80Hz
EQ - CH. B Treble: 10dB range @ 4kHz
Mid: 10dB range @ 1kHz
Low: 12dB range @ 100Hz
PRESENCE 18dB range @ 20kHz
SPEAKER SPECS VFX 5112: 1 X 12”, 60w, 16 ohm, 1.75” voice coil diameter, 38oz. magnet
VFX 5212: 2 X 12”, 60w, 8 ohm, 1.75 voice coil diameter, 38oz. magnet
PREAMP TUBES (4) 12AX7A
POWER TUBES (2) EL34
POWER REQUIREMENTS 120 VAC, 60 Hz, 200VA
100/115 VAC, 50/60 Hz, 200VA
230 VAC, 50/60 Hz, 200VA
SIZE AND WEIGHT VFX 5112: 23”W x 19” H x 10”D, 48 lbs.
VFX 5212: 28”W x 21” H x 11”D, 58 lbs.
The VFX 5112/5212 is covered with a durable Tolex material: wipe it clean with a lint-free cloth.
Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications and infor-
mation in this manual are subject to change without notice.
www.v-seriesamps.com
@2002 SLM Electronics, a division of St. Louis Music, Inc • 1400 Ferguson Avenue • St. Louis, MO 63133
47-036-02 • 03/02
VFX 5112/5212 Guitar Amplifier