Specifications

Operational Checkout
DMAN-0001 REV B 37
Configuration Button
Button Function
Input Select
Selects the Input Signal, allowing the manual selection of the Video
Source. Cycles in the following order: VGA-Composite-SVideo-DVI- and
then back to VGA.
Reset
Resets the Display Controller Unit. When this button is selected, the Unit
cycles through the 4 Video Source types, above. If it does not find an input
signal on a connector, it displays the message “No Input.”
Diag (Diagnostics)
This button displays on the Flexible Display a set of preloaded patterns as
follows, in this order: Red Screen-Green Screen-Blue Screen-White
Screen-Grey Scaled Color Bars.
Table 5. Flexible Display Troubleshooting Colors
If you see this screen
It means
Solid black screen
There is no power getting to either the Display Controller Unit or the
Flexible Display Unit. Check the CAT5 cable. Check all connections to
ensure they are connected and in good working order.
Solid blue screen
A Blue screen means that the Display Controller is getting an electrical
feed and is operating normally, but detects no Video Source (input). Check
to ensure your input source is connected and Turned On.
6.5.3.2 Supported Resolution for the Video Source Input Port
The input resolutions supported by the system are as follows:
 800x600
 1024x768 (Preferred)
 1280x768
 1280x800
 1280x960
 1280x1024
 1440x900
 1600x1200
 1680x1050