Specifications

Operational Checkout
DMAN-0001 REV B 35
6. On the front of the Power Supply, flip the black On/Off switch to the ON
position. See Figure 20: NanoLumens Power Supply Front View.
The Power Supply fan will start.
6.5.2 Step 2: Connect the Display Controller to the Media Player
Next, provide power to the Display Controller Unit, and connect the Display Controller
Unit to your Media Player. The following diagram is a depiction of the Basic Display
Controller Unit Setup Configuration.
2.
Display
Controller
Box
DVI / VGA
Connector
Composite
Connector
S-Video
Connector
Customer
Media Player
TV or Analog
Video Source
S-Video
Connector
Composite
Connector
Front of
Box
Rear of Box
RJ45 to
NanoLumens
Display
Power
18 Volt
Twist Lock
Ring to
Secure
Cable
A/C Adapter
DVI / VGA
Connector
CAT5
Data
Cable
Figure 26: Basic Display Controller Unit Setup Configuration
1. Connect the DVI/VGA media player cable to the Display Controller and turn your
media player ON.
NOTE: You may opt to connect different or multiple video sources to the Display
Controller Unit. Use a Composite or S-Video Connector, as appropriate, to
connect a TV or other Analog Video Source to the Display Controller Unit.