Specifications

NanoLumens Flexible Display Setup and Operation Manual
34 DMAN-0001 REV B
6.5.1 Step 1: Connect Power and Cables to the Flexible Display
This step provides procedures to connect the cables from the Display Connector Unit and
Power Supply to the Flexible Display. The data cable is the cable with the circular
connector.
Figure 25: Flexible Display Cable Connections
1. Connect the 48-60VDC power cable to the back of the Power Supply.
2. Using the AC power supply cable, connect the Power Supply to a 100-240V
AC outlet. (You may need an adaptor, depending on your region. The cable
supplied is for use in the United States, only.)
3. Connect the data cable to the Display Controller Unit.
4. Using the data cable from the Display Controller Unit, connect the Display
Controller Unit to the data connector on the back of the Flexible Display.
When connecting the data cable to the Flexible Display, on the circular
connector, line up both connectors and rotate clockwise to lock the cable.
5. Connect the power cable from the AC-DC Converter Power Supply to the
Flexible Display.
The power cable attaches in the same way the data cable attaches.