Specifications

NanoLumens Flexible Display Setup and Operation Manual
24 DMAN-0001 REV B
5.0 System Setup Process
5.1 Overview
The system is manufactured with the current firmware and software versions and default
settings.
Refer to Table 1 for a list of components shipped with the system.
To install the hardware, follow the process outlined below. Each step below is described
in further detail in section 6.5 System Setup Procedures.
 Step 1: Connect power and cables to the Flexible Display
 Step 2: Connect the Display Controller to the Media Player
 Step 3: Power up and test the system
Steps 1 and 2 can be completed in any order.