Specifications

NanoLumens Flexible Display Setup and Operation Manual
16 DMAN-0001 REV B
8. Lift the display hanging bar with brackets up and over the shipping bar.
9. Pull the hanging bar downward to secure the brackets. They will fit snugly over
the shipping bar. No additional bolts are needed to secure.
Protect the Flexible Display’s face with the soft cover:
10. If not already attached, affix the Velcro edge of the soft, protective cover along
the top of the hanging bar. The Velcro will attach to each support bracket rib that
the hanging bar runs through.
11. Tie each bottom corner.
The shipping box is now ready to seal for shipping.
4.2.3 Unload from the Rolling Cart
Follow these steps to safely unload the Flexible Display from the rolling cart.
Preparation Checklist
 Refer to Table 1. Components Shipped, column Shipped with Cart, and Table
2. Required Tools Not Provided.
Steps
1. Extend the integral handle bars out on each side of the hanging bar. If still
attached, leave the soft cover attached to the display, for now.
2. Remove the two (2) cotter pins from the hanging points on the front of the cart.
Two people are required for steps 3 and 4.