Specifications

Changing Out the Hanging Bars
DMAN-0001 REV B 11
4.2 Unloading and Loading Guidelines
This section provides guidelines that should be taken into consideration whenever a
Flexible Display is going to be unloaded from or loaded onto the shipping crate or the
rolling cart.
Upon delivery and prior to the start of any installation activities, a thorough inventory of
equipment should be performed.
 Any missing hardware provided by NanoLumens should be addressed with
NanoLumens immediately.
 Any missing tools and mounting hardware should be addressed with your
company.
4.2.1 Unload from the Shipping Crate
Follow the steps outlined, below, to safely unload the Flexible Display from its shipping
crate.
Preparation Checklist
 Refer to Table 1. Components Shipped, column Shipped with Crate, and
Table 2. Required Tools Not Provided.
Steps
1. Remove the shipping crate‟s „front door‟ from the crate by removing the screws
using a #2 Phillips screwdriver or appropriate power tool.
2. Lay the front door flat on the floor with the foam side UP.
WARNING! VERY IMPORTANT!
Clear the foam, floor or large table
work surface of any debris.
It is very important that the display face
does not get scratched.