HANDLE CAMERA SYSTEM OWNERS MANUAL TEC-B-0008 REV5 01/31/2013
Page 1 TABLE OF CONTENTS TITLE PAGE Equipment Labels...................................................................................................................................... 2 Camera Control Unit Safety Instructions................................................................................................... 3 Special User Attention............................................................................................................................... 4 Introduction..............
Page 2 EQUIPMENT LABELS AND SPECIFICATIONS EQUIPMENT LABELS AND SPECIFICATIONS ATTENTION, CONSULT MANUAL FOR FURTHER INSTRUCTIONS. INDICATES SPECIAL USER ATTENTION. INDICATES DANGEROUS VOLTAGE 100-240V~, 50/60Hz AC VOLTAGE 2A TYPE B EQUIPMENT FUSE TYPE 2 AMP, 250V, TIMELAG CLASS I, TYPE B EQUIPMENT- IPXO RATED. CONTINUOUS OPERATION CERTIFIED BY ETL TO THESE STANDARDS: Audio, Video and Similar Electronic Apparatus: Safety Requirements - IEC 60065 : 2001 (7th Edition) + Amendment 1 Edition 7.
Page 3 CAMERA CONTROL UNIT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. This apparatus shall not be exposed to dripping or splashing and no objects that contain water such as vases, shall be placed on the apparatus. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacurer’s instructions.
Page 4 SPECIAL USER ATTENTION To help assure the highest degree of operating safety for user and patient, SKYTRON has provided precautionary instructions throughout this manual. As with the operation of any surgical light, all hospital personnel should be aware that a certain amount of care must be exercised to maintain patient safety and to keep your SKYTRON Surgical Light performing at peak efficiency.
Page 5 INTRODUCTION SKYTRON’S Precision HD Handle Camera System provides HD quality video to camera ready lightheads. The Sony single chip camera provides quality levels that are comparable to many 3 chip systems. The system design permits transport from room to room, wherever other Precision HD camera ready lightheads are available. The camera control unit can be connected to any existing monitor. A convenient wall jack is provided for camera control connection. Figure 1.
Page 6 INSTALLATON Camera Installation Camera Removal CAUTION Make sure Main Power Switch on the light fixture Wall Control is in the OFF position before installing or removing the camera. Use the following procedure to install the camera system. To remove the camera assembly from the lighthead, hold the camera firmly, and press the camera release button on the lighthead attachment ring (figure 3). Carefully pull the camera assembly straight out of the attachment ring.
Page 7 Counterweight The counterweight must be installed to maintain the proper weight required to balance the lighthead when the camera is not installed. COVER LOCKING PINS LIGHTHEAD ATTACHMENT RING Install the counterweight in the lighthead and ensure that it is fully engaged by pulling and slightly turning it. Refer to figure 4. To remove the counterweight from the lighthead, hold the counterweight firmly, and press the camera release button on the lighthead attachment ring (figure 3).
Page 8 Operation Camera Control Unit Configuration All parts of the camera system are suitable for use within the patient area. 1. Attach the Cable from the connector on the faceplate to the camera control unit (CCU). See figure 7. To ensure patient safety, do not touch any component of the system and the patient simultaneously. Turn main power switch on at the Wall Control. Adjust the intensity control.
Page 9 Camera Control Unit The Camera Control Unit provides controls for camera rotation, manual or automatic adjustment of Iris (Aperture), Zoom, Focus and One Push White Balance. Refer to figure 9 for control locations. MAIN POW- WB ZOOM D UP CAMERA FOCUS IRIS ROTATION AE DOWN ONE PUSH WB Figure 9. Camera Control Unit, front view ZOOM - controls the image size. To make the subject larger, press the button. To make the subject smaller, press the button.
Page 10 The Handle Camera system consists of a Lighthead handle mounted, super compact color HD camera with a 120X zoom (10X Optical, 12X Digital) with a high speed, auto focus lens and flexible outputs for video conferencing, broadcasting and point-of-view (POV) applications.v SPECIFICATIONS: Image Sensor 1/3-type CMOS Iris Automatic/Manual Video Output HD Analog Component: Y/Pb/Pr, RGB. HD Digital Component: DVI Min. Sensitivity 12 Lux (typical) (F1.
CAMERA B1-710-56 COUNTERWEIGHT B1-710-66 STERILIZABLE CAMERA COVER B1-710-57 FIXTURE JUNCTION BOX PrecisionHD HANDLE CAMERA SYSTEM • REV5 POWER CORD FOR CAMERA CONTROL UNIT B9-211-04 VIDEO “OUT” (COAXIAL CABLE (3) CONNECTOR) B1-710-04 CAMERA CONTROL UNIT B1-710-59 COAXIAL CABLE (4) CONNECTOR B1-710-03 WALL CONTROL (SKYTRON SUPPLIED) TO BE MOUNTED NEAR ENTRANCE DOOR OR AT N.D.C.
Page 12 PRECISION HD CAMERA SYSTEM PrecisionHD HANDLE CAMERA SYSTEM • REV5
Page 13 DAMAGED SHIPMENT CLAIM PROCEDURE Whenever a shipment suffers damage while in the custody of the transportation company, the responsibility lies with the transportation company, and the value of the damages can be collected from the transportation company if the proper procedures are followed. When a shipment is received in a damaged condition and due to the appearance of the containers such as a broken crate, torn wrapping, or smashed carton, the contents may have been damaged.
Page 14 PrecisionHD HANDLE CAMERA SYSTEM • REV5
REVISION HISTORY Date 01/31/2013 Revision 5 Author Bill Brady Page 15 Summary of Changes Updated sterilization parameters and note on page 7.
5085 Corporate Exchange Blvd. S.E. Grand Rapids, MI 49512 • 1.616.656.2900 • FAX 1.616.656.
