Specifications

Ram adjusting procedure:
If the ram is cycling erratically or drifting down where it is difficult to insert a
plug into the nest, follow these instructions.
When the ram drops down to low after the plugs have been tested and then
removed from the nest, the micro switch is a bit out of adjustment.
• Loosen the nut (item #72) and turn the screw counter clockwise about
1/8
th
of a turn, then tighten the nut.
If this doesn’t eliminate the problem repeat the process.
(this could also be done if the ram runs up and down without
stoping.) but turn screw clockwise.
If the ram reaches the top and doesn’t come down properly to it’s initial
starting point an adjustment the opposite direction is necessary
(counterclockdwise).
24