User manual

product, the mains connector to the premise wiring must be disconnected. Dangerous voltages may be present under
certain conditions, use extreme caution.
Explosive Atmosphere : Do not operate the crate in conditions where flammable gases are present. Under such
conditions this crate is unsafe and may ignite the gases or gas fumes.
Part Replacement : Only service this crate with parts that are exact replacements, both electrically and mechanically.
Installation of parts that are not exact replacements may cause harm to personnel operating the crate. Furthermore,
damage or fire may occur if replacement parts are unsuitable.
Modification : Do not modify any part of the crate from its original condition. Unsuitable modifications may result
in safety hazards.
1.6. Warning Regarding Medical Use
The CC121 crates are not designed with components and testing intended to ensure a level of reliability suitable for
use in treatment and diagnosis of humans. Applications of these crates involving medical or clinical treatment can
create a potential for accidental injury caused by product failure, or by errors on the part of the user. These crates are
not intended to be a substitute for any form of established process or equipment used to monitor or safeguard human
health and safety in medical treatment.
WARNING : The modules discussed in this manual have not been designed for making direct measurements on
the human body. Users who connect an Acqiris module to a human body do so at their own risk.
1.7. Packaging and Handling
After carefully unpacking all items, inspect each to ensure there are no signs of visible damage. Check to make sure
that all hardware and the switch are undamaged. Inspect the inner chassis for any possible damage, debris, or
detached components. If damage appears to have been caused in shipment, file a claim with the carrier. Also check
that all the components received match those listed on the enclosed packing list. Agilent cannot accept responsibility
for missing items unless we are notified promptly of any discrepancies. If any items are found to be missing or are
received in a damaged condition please contact the Agilent service center or your local supplier immediately. Retain
the box and packing materials for possible inspection and/or reshipment.
Verify that you have received the following items with your CC121 crate :
• Power cord
Power Cord Rating Reference Standards
Universal Europa 250V/10A CEE7 sht/IEC320 C13
North America 125V/15A NEMA 5-15/IEC320 C13
United Kingdom 250V/10A BS1363A/IEC320 C13
Italy 250V/10A CIE 23-16/IEC320 C13
Switzerland 250V/10A SEV1011/IEC320 C13
• User Manual: Agilent Acqiris 21-slot cPCI Crate
• Declaration of Conformity.
• A compact disc in an Agilent Technologies paper CD envelope that includes
o 10 product User Manuals in electronic form (8-bit Digitizers, 10-bit Digitizers, 12-bit Digitizers,
Averagers, Analyzers, Signal Analyzers, Streamer Analyzers, Time-to-Digital Converters, 3-, 5-,
and 8-slot CompactPCI Crates, and the 21-slot CompactPCI Crate),
o 1 Programmer’s Guide and 1 Programmer’s Reference Manual,
o device drivers with sample software for different operating systems, environments and languages,
o the AcqirisAnalyzers application, a demonstration program for the AC/SC Analyzer products,
o the AcqirisLive application, a demonstration program for our digitizer and averager products,
o the DemoSSR application, a demonstration program for the Acqiris AP235/AP240 Analyzers,
o the DemoAPX01 application, a demonstration program for the Acqiris AP101/AP201 Analyzers,
o the DemoTC application, a demonstration program for the Acqiris TC840/TC890 Time-to-Digital
Converters,
User Manual: Agilent Acqiris 21-slot cPCI Crate Page 5 of 19