Instruction manual

SR-212RT TECHNICAL SPECIFICATIONS
OUTPUT POWER RATING 100 Watts RMS @ 6 % THD 16 ohm load 120 VAC
SIGNAL TO NOISE RATIO 65dB Typical
GAIN 84 dB Clean channel, 95 dB Overdrive channel
TREBLE 22 dB Range @ 10 kHz
MID 5 dB Range @ 500 Hz
BASS 15 dB Range @ 150 Hz
SPEAKER SPECS 2 X 12” Celestion Vintage 30, 70 w, 8 ohm,
1.75” voice coil diameter, 50 oz. magnet
PREAMP TUBES (3) 12AX7A
POWER TUBES (4) 6L6
POWER REQUIREMENTS 120 VAC, 60 Hz, 280VA
100/115 VAC, 50/60 Hz, 280VA
230 VAC, 50/60 Hz, 280VA
SIZE AND WEIGHT 28”W x 21” H x 10.5”D, 77 lbs.
Ampeg is Made With Pride in the U.S.A. • ©2002 Ampeg, 1400 Ferguson Avenue,
St. Louis, MO 63133 U.S.A.
47-157-03 • 050103
Specifications and information subject to change without notice.
www.ampeg.com