Assembly Instruction

YPSILON SIDEBOARD
Made in Vietnam - r06 Page 3 of 4
6 Attach 4 legs (2 A, 2 B) to bottom panel as shown.
Secure each leg to bottom panel with 1 large bolt, 1
large spring washer, and 1 large flat washer as
shown, using an allen wrench.
7 A) With the assistance of anther adult, position unit
upright as shown. Insert 8 shelf pins at desired shelf
heights. Press shelf pins firmly to secure.
B) Place 1 small adjustable shelf and 1 large adjustable
shelf onto shelf pins as shown. Make sure shelves are
securely supported by each shelf pin.
bottom
panel
5 Fit dowels of bottom panel into corresponding holes of
left/right side panel and partition. Secure bottom panel
to left/right side panel and partition with 6 small bolts, 6
small spring washers and 6 small flat washers, using an
allen wrench. Do not over tighten the bolts.
NOTE: Do not over
tighten the bolts
leg B
leg A
leg A
leg B
small
adjustable
shelf
large
adjustable
shelf
shelf
pins
8 A) Attach 2 side door hinges to left door front with 2
screws per hinge as shown. Secure, but do not over tighten,
screws with a screwdriver.
B) Attach 2 side door hinges to right door front with 2
screws per hinge as shown.
C) Attach 1 pull to left and right door fronts with 2 pull
bolts as shown.
left door
front
NOTE: Do not over
tighten the screws
pull
B
A
B
A
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
A
C
A
side
door hinge
B
pull
C
side
door hinge
right door
front
B