Assembly Instruction

YPSILON SIDEBOARD
Made in Vietnam - r06 Page 2 of 4
1 Insert 2 wood dowels and 2 cams into left/right side
panel and partition as shown. Make sure arrows on each
cam point towards nearest edge with holes.
2 Place top panel upside down onto a clean, padded
surface as shown. Insert 6 cam screws and 6 wood
dowels into top panel. Secure, but do not over tighten,
cam screws with a phillips head screwdriver.
left side panel
NOTE: Make sure
arrows on each cam
point towards nearest
edge with holes
left side
panel
right side
panel
NOTE: Do not over
tighten the cam screws
top panel
right side panel
partition
back panel
partition
top panel
3 Fit dowels of top panel into corresponding holes of
right/left side panels and partition as shown. Using
a phillips head screwdriver, turn each cam clockwise
until each cam securely engages each cam screw.
4 Fit back panel into corresponding grooves of left/right
side panels and top panel as shown.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com