Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Ypsilon Sideboard

Made in Vietnam - r06 Page 1 of 4

Thank you for purchasing the Ypsilon Sideboard. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

YPSILON SIDEBOARD

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 - small

adjustable shelf

1 - back panel

1 - top

panel

2 - side panels

(1 left, 1 right)

3 - door fronts

(1 left, 1 center, 1 right)

ASSEMBLY HARDWARE

TOOLS REQUIRED

(We recommend the use of hand tools instead of power tools)

6 - small

bolts

36 - screws

12 - wood

dowels

COMPONENTS

4 - large

bolts

6 - cam

screws

6 - cams

8 - shelf

pins

3 - pulls4 - side

door hinges

phillips head screwdriver allen wrench (included)

1 - partition

1 - large

adjustable shelf

4 - legs

(2 A, 2 B)

6 - pull

bolts

Missing hardware? Please call 800.606.6387 for replacements.

6 - small

spring

washers

6 - small

flat

washers

4 - large

spring

washers

4 - large

flat

washers

1 - bottom

panel

2 - center

door hinges

Summary of content (4 pages)

PAGE 1
YPSILON SIDEBOARD ASSEMBLY HARDWARE 12 - wood dowels 6 - small bolts 4 - large bolts 6 - cam screws 6 - cams 6 - small spring washers 6 - small flat washers 4 - large spring washers 4 - large flat washers 8 - shelf pins 4 - side 2 - center door hinges door hinges Thank you for purchasing the Ypsilon Sideboard. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
YPSILON SIDEBOARD NOTE: Make sure arrows on each cam point towards nearest edge with holes NOTE: Do not over tighten the cam screws left side panel top panel right side panel partition 1 Insert 2 wood dowels and 2 cams into left/right side panel and partition as shown. Make sure arrows on each cam point towards nearest edge with holes. right side panel 2 Place top panel upside down onto a clean, padded surface as shown. Insert 6 cam screws and 6 wood dowels into top panel.
PAGE 3
YPSILON SIDEBOARD bottom panel NOTE: Do not over tighten the bolts leg A leg B leg B leg A 5 Fit dowels of bottom panel into corresponding holes of left/right side panel and partition. Secure bottom panel to left/right side panel and partition with 6 small bolts, 6 small spring washers and 6 small flat washers, using an allen wrench. Do not over tighten the bolts. 6 Attach 4 legs (2 A, 2 B) to bottom panel as shown.
PAGE 4
YPSILON SIDEBOARD Refer to Hinge Adjustment diagram for adjusting the alignment of the door hinges. A center door hinge left door front right door front pull center door front B center door front 10 Attach hinges of left, center and right door fronts to assembled unit. Secure each hinge with 4 screws, using a screwdriver as shown. Assembly is now complete. 9 A) Attach 2 center door hinges to center door with 2 screws per hinge as shown.