Assembly Instruction

shelf
socket
bracket
plug
bracket
groove
B
A
B
A
wheel
wheel
locking
wheel
locking
wheel
drawer bottom
drawer bottom
drawer
drawer
socket
bracket
plug
bracket
groove
A
A
C
Made in Taiwan - r03
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
WORK MOBILE STORAGE UNIT
Page 2 of 3
2 A) Fit 1 plug bracket and 1 socket bracket onto
groove of each assembled leg as shown. Make sure
brackets snap-fit securely together.
B) Fit assembled legs into corresponding holes of 1
shelf. Slide shelf over brackets and press down firmly
to secure.
NOTE: Make sure
wheels and locking wheels
are positioned as shown
3 A) Place assemble unit upright. Fit 1 plug bracket
and 1 socket bracket onto groove of each assembled
leg as shown. Make sure brackets snap-fit securely
together.
B) Fit assembled legs into corresponding holes of 1
drawer. Slide drawer over brackets and press down
firmly to secure.
C) Fit drawer bottom into assembled drawer as shown.
Repeat steps 3A-3C for remaining drawer and drawer
bottom.
NOTE: Make sure
shelf faces up
as shown