Assembly Instruction

HARDWARE
COMPONENTS
ASSEMBLY
Made in Taiwan - r03 Page 1 of 2
1 Attach 1 short threaded connector and 1
foot to bottom leg by turning each
counterclockwise to secure. Repeat for
remaining legs.
Thank you for purchasing the Work Stacking Wine 12
Bottle. This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted or
padded area to protect them from damage.
4 - feet
wine rack
shelf
socket
bracket
NOTE: Make sure
feet are facing down
as shown
4 - long
threaded
connectors
short
threaded
connector
4 - legs 3 - wine rack
shelves
12 - socket
brackets
leg
foot
2 A) Fit 1 plug bracket and 1 socket bracket onto groove of
each assembled leg as shown. Make sure brackets snap-fit
securely together.
B) Fit assembled legs into corresponding holes of 1 wine rack
shelf. Slide wine rack shelf over brackets and press down
firmly to secure. Repeat steps for remaining wine rack shelves.
12 - plug
brackets
NOTE: Make sure
wine rack shelf
faces up as shown
plug
bracket
groove
4 - short
threaded
connectors
WORK STACKING WINE 12 BOTTLE
Missing hardware? Please call
800.606.6387 for replacements.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com