Assembly Instruction

Made in China - r05 Page 4 of 4
WINDHAM TALL ONE-DOOR CABINET
8 Safety Mounting Instructions
For added safety and stability, it is recommended that the
wall mounting hardware be installed. For safe mounting, it
is essential to use wall anchors appropriate to your wall type
(i.e. plaster, drywall, concrete, etc.). Mount to wood studs
whenever possible.
A) Attach anti-tip bracket to top center of cabinet using 2
small screws.
B) Determine the final location of cabinet. Mark position on
the wall, approximately 2" below the anti-tip bracket
mounted to the back of the cabinet.
C) Drill a hole in the wall stud. If the wall stud is not
available, drill a hole in the wall that is slightly smaller in
diameter than the anchor. Gently tap the plastic anchor
until the flange of the anchor is flush with the wall.
D) Attach the wall bracket to the wall by inserting 1 large
screw through the wall bracket and into the wall anchor in
the wall.
E) Place the unit so the anti-tip bracket on the back edge is
allowed with the wall bracketl.
F) Lace one end of the wall strap through both brackets,
and into the other end of the strap.
G) Pull the strap tightly until secure.
NOTE:
If you are unsure about your wall type or what
mounting method you should use, consult a
qualified professional or your local hardware
store.
A
C
D
F
anti-tip
bracket
small
screw
wall
bracket
plastic
anchor
large
screw
wall
strap
Customer Service 800.967.6696 | www.crateandbarrel.com