Assembly Instruction

12 Insert 8 cam screws into top panel as shown.
WINDHAM BENCH
Made in China - r06 Page 4 of 5
9 A) With the assistance of another adult, position unit
upside down as shown. Insert 2 barrel nuts into back of
assembled unit as shown. With a screwdriver, align each nut
so the threaded holes are vertical as shown.
B) Insert 7 wood dowels into assembled unit as shown.
10 A) Fit dowels of assembled unit into corresponding holes
of bottom frame as shown, and secure with 6 small bolts.
B) Insert 2 large bolts into barrel nuts of back panel and
secure with a screwdriver.
top panel
11 Insert 8 wood dowels into bottom of assembled
unit as shown. Fit 2 legs A and legs B into
assembled unit as shown, and secure with 2 large
bolts per leg using a screwdriver. Make sure each leg
(A, B) is attached to corresponding label on bottom
panel.
top of unit
bottom of unit
bottom
frame
NOTE: Make sure threaded
holes are aligned with holes
on edge of back panel
large
bolts
small
bolts
NOTE: If attaching bench
to Windham Back Panel,
only attach the 2 front feet
Customer Service 800.967.6696 | Latest instructions available on www.crateandbarrel.com
A
leg A
leg A
leg B
leg B
B
A
B
B
A
A
B