Assembly Instruction

3 Insert 10 wood dowels into back panel as shown.

4 Fit dowels of back panel into corresponding holes

of assembly as shown.

WINDHAM BENCH

Made in China - r06 Page 2 of 5

1 A) Insert 2 barrel nuts into middle panel as shown.

With a screwdriver, turn nut so the threaded holes are

aligned with holes in panel edge as shown.

B) Insert 2 cams and 4 wood dowels into middle panel

as shown. Make sure arrows on each cam point

towards nearest edge with holes.

C) Insert 3 wood dowels into bottom panel as shown.

NOTE: Make sure arrows

on each cam point towards

nearest edge with holes

middle panel

bottom panel

middle panel

bottom panel

2 A) Fit dowels of middle panel into corresponding holes

of bottom panel as shown. Insert 2 large bolts into barrel

nuts of middle panel as shown, using a screwdriver.

large

bolt

NOTE: Make sure threaded

holes are aligned with holes

in panel edge

NOTE: Make sure large

bolts insert through

threaded holes of each

barrel nut

cams

Customer Service 800.967.6696 | Latest instructions available on www.crateandbarrel.com

back panel