Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Windham Storage Bench

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r06 Page 1 of 5

Thank you for purchasing the Windham Bench. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

WINDHAM BENCH

Missing hardware? Please call 800.606.6387 for replacements.

Phillips head screwdriver

Customer Service 800.967.6696 | Latest instructions available on www.crateandbarrel.com

46 - wood

dowels

16 - cams 16 - cam

screws

4 - barrel

nuts

12 - large

bolts

1 - top

panel

1 - middle

panel

1 - right

side panel

1 - left

side panel

2 - legs A 2 - legs B

1 - front

frame

1 - back

panel

1 - bottom

panel

1 - bottom

frame

8 - small

bolts

Summary of content (5 pages)

PAGE 1
WINDHAM BENCH HARDWARE Thank you for purchasing the Windham Bench. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. 46 - wood dowels 16 - cams 16 - cam screws 4 - barrel nuts 12 - large bolts 8 - small bolts Missing hardware? Please call 800.606.6387 for replacements.
PAGE 2
WINDHAM BENCH A B NOTE: Make sure arrows on each cam point towards nearest edge with holes middle panel large bolt bottom panel NOTE: Make sure threaded holes are aligned with holes in panel edge barrel nut middle panel C cams bottom panel 1 A) Insert 2 barrel nuts into middle panel as shown. With a screwdriver, turn nut so the threaded holes are aligned with holes in panel edge as shown. B) Insert 2 cams and 4 wood dowels into middle panel as shown.
PAGE 3
WINDHAM BENCH right side panel right side panel left side panel left side panel 5 Insert 4 cams, 4 wood dowels, and 2 cam screws into left and right side panel as shown. 6 A) Insert 4 cams into back panel of assembled unit as shown. B) Fit dowels of assembled unit into corresponding holes of left and right side panels as shown. Secure all cams with a screwdriver. Make sure each cam securely engages each cam screw as shown.
PAGE 4
WINDHAM BENCH NOTE: Make sure threaded holes are aligned with holes on edge of back panel B B large bolts B A bottom frame A bottom of unit A top of unit 9 A) With the assistance of another adult, position unit upside down as shown. Insert 2 barrel nuts into back of assembled unit as shown. With a screwdriver, align each nut so the threaded holes are vertical as shown. B) Insert 7 wood dowels into assembled unit as shown.
PAGE 5
WINDHAM BENCH top panel 13 A) With the assistance of another adult, carefully position unit upright as shown. Insert 2 cams into back panel of assembled unit as shown. B) Fit dowels of assembled unit into top panel, and secure with 2 small bolts using a screwdriver. Secure all cams. Assembly is now complete. A B CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Made in China - r06 Customer Service 800.967.6696 | Latest instructions available on www.