Assembly Instruction

Made in China - r03 Page 2 of 3
1 Attach right and left side panels onto fixed shelf
with 2 wood dowels and 1 medium bolt per side
panel as shown. Secure, but do not over tighten, with
a phillips head screwdriver.
WINDHAM LOW TWO-DOOR CABINET
2 With the assistance of another adult, carefully place front
frame face down onto a clean, padded surface. Please be
cautious of doors opening when placing front frame downwards.
A) Insert 6 wood dowels into assembled unit as shown.
B) Fit front frame onto assembled unit, and secure with 6
medium bolts as shown.
3 A) Insert 7 barrel nuts into assembled unit as
shown. With a screwdriver, align each nut so that the
threaded holes are horizontal as shown.
B) Insert 6 wood dowels into assembled unit as
shown.
C) Fit bottom panel onto assembled unit and secure
with 7 large bolts as shown.
4 Insert 8 wood dowels into assembled unit as
shown. Fit 2 leg A and 2 leg B onto assembled unit as
shown, and secure with 2 large bolts per leg. Make
sure each leg (A, B) is attached to corresponding label
on bottom panel.
fixed
shelf
left side
panel
right side
panel
Make sure threaded holes
are horizontally aligned
VIEW FROM
BELOW
front
frame
VIEW FROM
BELOW
VIEW FROM
BELOW
Customer Service 800.967.6696 | www.crateandbarrel.com
A
B
C
A
B
A
A
Make sure each leg A/B is
attached to corresponding label
on bottom panel
A
B
B