Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r03 Page 1 of 3

Thank you for purchasing the Windham Low Two-

Door Cabinet. This page lists all the contents included

in the box. Please take time to identify the hardware as

well as the individual components of this product. As

you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect them

from damage.

Note: 2 people are required to safely assemble this product.

WINDHAM LOW TWO-DOOR CABINET

Missing hardware? Please call

800.606.6387 for replacements.

31 - wood

dowels

4 - shelf

pins

7 - barrel

nuts

18 - medium

bolts

15 - large

bolts

2 - pulls 2 - plates 2 - small

bolts

2 - side panels

(1 left, 1 right)

1 - fixed shelf 1 - bottom panel

1 - back panel

4 - legs

(2 leg A, 2 leg B)

1 - top panel 1 - adjustable shelf

1 - front frame

Phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

PAGE 1
WINDHAM LOW TWO-DOOR CABINET HARDWARE Thank you for purchasing the Windham Low TwoDoor Cabinet. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
WINDHAM LOW TWO-DOOR CABINET VIEW FROM BELOW B A left side panel fixed shelf right side panel front frame 1 Attach right and left side panels onto fixed shelf with 2 wood dowels and 1 medium bolt per side panel as shown. Secure, but do not over tighten, with a phillips head screwdriver. C Make sure threaded holes are horizontally aligned 2 With the assistance of another adult, carefully place front frame face down onto a clean, padded surface.
PAGE 3
WINDHAM LOW TWO-DOOR CABINET A B 5 With the assistance of another adult, carefully position unit upright. Slide back panel into grooves of assembled unit as shown. 6 A) Insert 7 wood dowels into assembled unit as shown. B) Fit top panel onto assembled unit and secure with 8 medium bolts as shown. A B CLEANING AND CARE C A Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.