Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Windham Corner Media Stand

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r05 Page 1 of 5

Thank you for purchasing the Windham Corner Media

Stand. This page lists all the contents included in the

box. Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the contents on

a carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

WINDHAM CORNER MEDIA STAND

Missing hardware?

Please call 800.606.6387

for replacements.

30 - large

bolts

2 - small

bolts

12 - medium

screws

34 - wood

dowels

2 - plates

2 - pulls 4 - shelf

pins

2 - side panels

(1 left, 1 right)

2 - back panels

( 1 left, 1 right)

1 - center back

panel

1 - front

frame

1 - top

panel

1 - adjustable

shelf

1 - bottom

panel

phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

2 - plastic

anchors

2 - wall

straps

2 - wall

brackets

2 - large

screws

4 - small

screws

2 - anti-tip

brackets

Summary of content (5 pages)

PAGE 1
WINDHAM CORNER MEDIA STAND HARDWARE Thank you for purchasing the Windham Corner Media Stand. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
WINDHAM CORNER MEDIA STAND A right side panel B left back panel B B A A left side panel front frame 1 A) Insert 6 wood dowels into front frame as shown. B) Fit dowels of front frame into corresponding holes of left and right side panels as shown. Attach side panels with 6 large bolts as shown. Secure bolts with a phillips head screwdriver. bottom panel 2 A) Insert 2 wood dowels into bottom panel as shown.
PAGE 3
WINDHAM CORNER MEDIA STAND front frame assembly B B A A bottom panel 5 A) Insert 8 wood dowels into bottom panel as shown. B) With the assistance of another adult, fit dowels of bottom panel into corresponding holes of front frame assembly. Secure front frame assembly with 6 large bolts as shown. 6 Insert 12 medium screws into left and right back panels of assembled unit as shown. Secure screws with a screwdriver.
PAGE 4
WINDHAM CORNER MEDIA STAND plate pull small bolt 9 Attach 2 pulls and 2 plates to doors of assembled unit with 1 small bolt per pull as shown. Secure bolts with a screwdriver. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. Made in China - r05 Customer Service 800.967.6696 | www.crateandbarrel.
PAGE 5
WINDHAM CORNER MEDIA STAND plastic anchor wall strap A small screw F anti-tip bracket C wall bracket D large screw 10 Safety Mounting Instructions For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Attach anti-tip bracket to top of media stand using 2 small screws as shown.