Assembly Instruction

Made in China - r06 Page 3 of 4
4 With the assistance of another adult,
carefully position assembled unit upside
down.
A) Insert 6 barrel nuts into assembled unit
as shown. With a screwdriver, align each
nut so that the threaded holes are vertical
as shown.
B Insert 6 wood dowels into assembled
unit as shown.
C) Fit bottom panel to assembled unit, and
secure with 6 large bolts as shown.
D) Insert 8 wood dowels into assembled
unit as shown.
E) Fit 1 leg A, 1 leg B, and 1 leg C to
assembled unit, and secure with 2 large
bolts per leg. Make sure each leg (A, B, C)
is attached to corresponding label on
bottom panel.
WINDHAM CORNER CABINET
5 A) With the assistance of another adult, carefully
position assembled unit upright. Insert 6 wood dowels
into top panel as shown.
B) Fit top panel to assembled unit as shown, and
secure with 6 medium bolts.
D
E
B
A
C
A
A
C
B
6 A) Insert 8 shelf pins into assembled unit at desired
shelf height as shown.
B) Place 2 adjustable shelves into assembled unit. Make
sure shelves are securely supported by each shelf pin.
C) Attach pull and plate onto door of assembled unit with 1
short bolt as shown. Secure bolt with a phillips head
screwdriver. Assembly is now complete.
B
A
Customer Service 800.967.6696 | www.crateandbarrel.com
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture
wax or polish as the wood is finished with a
protective clear lacquer.
Leg A
Leg C
Leg B
A
B
C
A
Make sure each
leg A/B is attached to
corresponding label
on bottom panel