Assembly Instruction

WIEDEN 1 DOOR CABINET
Made in China - r09 Page 2 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
2 A) Insert 3 wood dowels, 4 cams and 3 cam screws
into left side panel as shown. Secure, but do not over
tighten, cam screws using a phillips head screwdriver.
B) Insert 4 wood dowels, 4 cams and 4 cam screws into
right side panel as shown.
3 A) Insert 7 wood dowels and 7 cam screws into
partition as shown.
B) Insert 8 wood dowels and 8 cam screws into top
panel as shown.
left side panel
4 A) Attach base assembly to bottom panel with 8
bolts as shown. Secure, but do not over tighten, the
bolts using an allen wrench.
B) With the assistance of another adult, carefully posi-
tion assembled unit upright. Insert 8 wood dowels and
8 cam screws into bottom panel as shown.
NOTE: Do not over
tighten the bolts
right side panel
A
B
partition
top panel
A
B
bottom panel
base assembly
NOTE: Make sure arrows
on each cam points toward
nearest edge with holes
B
bottom panel
NOTE: Do not over
tighten the cam screws
1 Insert 10 cams into back panel as shown. Make
sure arrows on each cam points toward nearest edge
with holes.
back panel