Assembly Instruction

WIEDEN MEDIA GAMING TOWER
Made in China - r08 Page 2 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 Insert 4 wood dowels, 4 cam screws and 4 cams into
left and right side panels as shown. Make sure arrows on
each cam point toward neasrest edge with holes. Secure, but
do not over tighten, cam screws using a phillips head screw-
driver.
2 A) Insert 4 wood dowels and 4 cam screws into
top panel as shown.
B) Insert 8 cams into back panel as shown.
C) Insert 4 cams, 2 wood dowels and 2 cam
screws into fixed shelf as shown.
right side panel
3 A) Attach base assembly to bottom panel with 8 bolts
as shown. Secure, but do not over tighten, the bolts using
an allen wrench.
B) With the assistance of another adult, carefully position
assembled unit upright. Insert 6 wood dowels and 6 cam
screws into bottom panel as shown.
NOTE: Do not over
tighten the bolts
top panel
B
bottom panel
base assembly
A
B
bottom panel
NOTE: Do not over
tighten the cam screws
left side panel
NOTE: Make sure arrows
on each cam point toward
nearest edge with holes
back panel
fixed shelf
A
C
fixed
shelf
back panel
4 Fit wood dowels of fixed shelf into corresponding
holes of back panel. Using a phillips head
screwdriver, turn cams clockwise until each cam
securely engages each cam screw.