Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Wieden Media-Gaming Tower

Made in China - r08 Page 1 of 5

Thank you for purchasing the Wieden Media Gaming

Tower. This page lists all the contents included in the

box. Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the contents on

a carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

WIEDEN MEDIA GAMING TOWER

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 - top panel 1 - back panel

1 - base

assembly

1 - door front

ASSEMBLY HARDWARE

TOOLS REQUIRED

8 - bolts 12 - shelf

pins

20 - cam

screws

20 - wood

dowels

COMPONENTS

2 - left and right

side panels

(1 left, 1 right)

1 - bottom

panel

WALL MOUNTING HARDWARE

1 - wall strap 1 - small

screw

1 - plastic

anchor

1 - large

screw

Missing hardware? Please call

800.606.6387 for replacements.

8 - small

screws

3 - adjustable shelves

(2 top, 1 bottom)

2 - hinges20 - cams

phillips head screwdriver

(We recommend the use of hand tools instead power tools)

allen wrench (included)

1 - fixed shelf

2 - magnet

screws

1 - magnet

Summary of content (5 pages)

PAGE 1
WIEDEN MEDIA GAMING TOWER ASSEMBLY HARDWARE Missing hardware? Please call 800.606.6387 for replacements. 20 - wood dowels 8 - bolts 20 - cam screws 8 - small screws 20 - cams 2 - hinges 1 - magnet 2 - magnet screws 12 - shelf pins WALL MOUNTING HARDWARE 1 - wall strap Thank you for purchasing the Wieden Media Gaming Tower. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
WIEDEN MEDIA GAMING TOWER NOTE: Do not over tighten the cam screws A top panel left side panel NOTE: Make sure arrows on each cam point toward nearest edge with holes B back panel right side panel C fixed shelf 1 Insert 4 wood dowels, 4 cam screws and 4 cams into left and right side panels as shown. Make sure arrows on each cam point toward neasrest edge with holes. Secure, but do not over tighten, cam screws using a phillips head screwdriver.
PAGE 3
WIEDEN MEDIA GAMING TOWER NOTE: Make sure arrows on each cam points toward nearest edge with holes bottom panel fixed shelf A left side panel B panel right side back panel 5 A) Make sure arrows on each cam points toward nearest edge with holes. Fit dowels of left side panel into corresponding holes of back panel and fixed shelf. B) Fit dowels of right side panel into corresponding holes of back panel and fixed shelf. Secure all cams.
PAGE 4
WIEDEN MEDIA GAMING TOWER NOTE: Do not over tighten the screws Refer to Hinge Adjustment diagram for adjusting the alignment of the door hinges. 10 Attach hinges of door front to left side panel as shown. Secure each hinge with 2 small screws, using a screwdriver. Assembly is now complete. door front 9 Attach 2 hinges to door front with 2 small screws per hinge as shown. Secure, but do not over tighten, screws with a phillips head screwdriver.
PAGE 5
WIEDEN MEDIA GAMING TOWER OPTIONAL SAFETY MOUNTING INSTRUCTIONS NOTE: Insert screws 3/4"-1" from the edge of the strap For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. wall strap A) Determine the final location of unit.