Assembly Instruction

WIEDEN 62” MEDIA STAND
Made in China - r04 Page 2 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 Place top panel onto a clean, padded surface.
Insert 12 wood dowels and 12 cam screws into top
panel as shown. Secure, but do not over tighten, cam
screws using a phillips head screwdriver.
2 Fit 8 cams into back panel as shown. Make sure
arrows on each cam point toward nearest edge with holes.
4 With assistance of another adult, align holes of base
with bottom of bottom panel and attach with 12 bolts as
shown. Secure, but do not over tighten, the bolts using an
allen wrench.
3 A) Insert 2 wood dowels, 2 cam screws and 4
cams into left and right side panels.
B) Insert 2 wood dowels, 2 cam screws and 4 cams
into left and right partitions.
B
top panel
NOTE: Make sure arrows
on each cam point toward
nearest edge with holes.
NOTE: Do not over
tighten the cam screws
left and right
side panels
back panel
A
left and right
partitions
bottom panel
base
NOTE: Do not over
tighten the bolts