Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Wieden 62" Media Console

COMPONENTS

Made in China - r04 Page 1 of 5

Thank you for purchasing the Wieden 62” Media Stand.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

WIEDEN 62” MEDIA STAND

1 - top panel 2 - side panels

ASSEMBLY HARDWARE

TOOLS REQUIRED

(We recommend the use of hand tools instead power tools)

1 - base

2 - back

panels

1 - bottom

panel

2 - doors

(1 left, 1 right)

2 - small adjustable

shelves

2 - large adjustable

shelves

2 - partitions

(1 left, 1 right)

WALL MOUNTING HARDWARE

1 - wall strap 1 - small

screw

1 - plastic

anchor

1 - large

screw

Missing hardware? Please call

800.606.6387 for replacements.

32 - wood

dowels

32 - cam

screws

16 - hinge

screws

12 - large

bolts

4 - hinges

16 - shelf

pins

32 - cams

2 - magnets

4 - magnet

screws

phillips head screwdriver

allen wrench (included)

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (5 pages)

PAGE 1
WIEDEN 62” MEDIA STAND ASSEMBLY HARDWARE 32 - wood dowels 32 - cam screws Missing hardware? Please call 800.606.6387 for replacements. 16 - hinge screws 16 - shelf pins 4 - magnet 2 - magnets 4 - hinges screws 32 - cams 12 - large bolts WALL MOUNTING HARDWARE 1 - wall strap Thank you for purchasing the Wieden 62” Media Stand. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
WIEDEN 62” MEDIA STAND NOTE: Do not over tighten the cam screws NOTE: Make sure arrows on each cam point toward nearest edge with holes. top panel back panel 1 Place top panel onto a clean, padded surface. Insert 12 wood dowels and 12 cam screws into top panel as shown. Secure, but do not over tighten, cam screws using a phillips head screwdriver. 2 Fit 8 cams into back panel as shown. Make sure arrows on each cam point toward nearest edge with holes.
PAGE 3
WIEDEN 62” MEDIA STAND left side panel back panel bottom panel 5 With the assistance of another adult, position unit upright as shown. Insert 12 wood dowels and 12 cam screws into bottom panel. NOTE: Make sure left/right side panels and left/right partitions are assembled as shown right back panel assembly left partition 6 Fit dowels of left side panel and left partition into corresponding holes of back panel. Using a screwdriver, turn each cam clockwise until it securely engages each cam screw.
PAGE 4
WIEDEN 62” MEDIA STAND A shelf pin NOTE: Do not over tighten the screws A large adjustable shelf B large adjustable shelf small adjustable shelf 9 A) Insert 16 shelf pins at desired shelf heights as shown. B) Place 2 small adjustable shelves and 2 large adjustable shelves onto shelf pins as shown. Make sure each shelf is securely supported by each shelf pin.
PAGE 5
WIEDEN 62Ó M EDIA STAND OPTIONAL SAFETY MOUNTING INSTRUCTIONS NOTE: Insert screws 3/4"-1" from the edge of the strap For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. wall strap A) Determine the final location of unit.