Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Wieden 48" Media Console

COMPONENTS

Made in China - r12 Page 1 of 5

Thank you for purchasing the Wieden Media Console.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

WIEDEN MEDIA CONSOLE

1 - door front1 - top panel

1 - base assembly

1 - partition

2 - side panels

(1 left, 1 right)

1 - back panel

3 - adjustable

shelves

(1 left, 2 right)

ASSEMBLY HARDWARE

TOOLS REQUIRED

Missing hardware? Please call

800.606.6387 for replacements.

20 - wood

dowels

20 - cam

screws

8 - small

screws

8 - large

bolts

2 - hinges

12 - shelf

pins

phillips head screwdriver

1 - bottom

panel

(We recommened the use of hand tools instead power tools)

allen wrench (included)

20 - cams

1 - magnet

WALL MOUNTING HARDWARE

1 - wall strap 1 - small

screw

1 - plastic

anchor

1 - large

screw

2 - magnet

screws

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (5 pages)

PAGE 1
WIEDEN MEDIA CONSOLE ASSEMBLY HARDWARE Missing hardware? Please call 800.606.6387 for replacements. 20 - wood dowels 20 - cam screws 8 - small screws 8 - large bolts 2 - hinges 20 - cams 1 - magnet 2 - magnet screws WALL MOUNTING HARDWARE 1 - wall strap Thank you for purchasing the Wieden Media Console. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
WIEDEN MEDIA CONSOLE NOTE: Do not over tighten the cam screws left side panel top panel partition 1 Insert 2 wood dowels and 2 cam screws into left side panel and partition. Secure, but do not over tighten, cam screws with a phillips head screwdriver. 2 Insert 8 wood dowels and 8 cam screws into top panel as shown. NOTE: Do not over tighten the bolts base assembly bottom panel 3 Attach base assembly to bottom panel with 8 large bolts as shown.
PAGE 3
WIEDEN MEDIA CONSOLE NOTE: Make sure arrows on each came points toward nearest edge with holes B A left side panel back panel B A partition right side panel 5 A) Insert 4 cams into back panel as shown. Make sure arrows on each cam points toward nearest edge with holes. B) Fit dowels of left side panel and partition into corresponding holes of back panel as shown.
PAGE 4
WIEDEN MEDIA CONSOLE NOTE: Do not over tighten the screws Refer to Hinge Adjustment diagram for adjusting the alignment of the door hinges. A A B door front door front 9 Attach 2 hinges to door front with 2 small screws per hinge as shown. Secure, but do not over tighten, screws with a screwdriver. magnet 10 A) Attach hinges of door front to left and right side panels as shown. Secure each hinge with 2 small screws, using a screwdriver. B) Attach 1 magnet to partition with 2 small screws as shown.
PAGE 5
WIEDEN MEDIA CONSOLE OPTIONAL SAFETY MOUNTING INSTRUCTIONS NOTE: Insert screws 3/4"-1" from the edge of the strap For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. wall strap A) Determine the final location of unit. Mark position on the wall, approximately 2Ó below the top of the unit as shown.