Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Taiwan - r02 Page 1 of 2

1 Remove adhesive cover on small left and right leg

frames as shown.

Thank you for purchasing the Nesting Tables. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

NESTING TABLES

20 - bolts

2 - tabletops

(1 small, 1 large)

4 - leg frames

(2 small, 2 large)

adhesive cover

small left and

right leg frame

ASSEMBLY

Missing hardware?

Please call 800.606.6387 for replacements.

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

allen wrench

(included)

PAGE 1
NESTING TABLES HARDWARE 20 - bolts Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Nesting Tables. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
NESTING TABLES 2 With the assistance of another adult, place small tabletop onto a clean, padded surface. Loosely secure 2 small leg frames to small tabletop with 5 bolts per leg frame as shown. Once leg frames are in place, fully tighten the bolts using an allen wrench. Do not over tighten the bolts. small leg frame small tabletop small leg frame CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.