Assembly Instruction

Made in Vietnam - r02 Page 4 of 5
WELLS 3-DRAWER DRESSER
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
10 A) Fit dowels of drawer crossbar into corresponding
holes of small drawer back. Attach small drawer back to
small drawer sides with 2 large screws as shown.
B) Attach 1 pull to small drawer front with 2 pull bolts as
shown. Secure, but do not over tighten, bolts with a
screwdriver.
Repeat steps 8-10 for remaining drawer assemblies.
A
11 Fit drawer glides of drawer assemblies into
corresponding drawer glides of assembled unit as shown.
Assembly is now complete.
small
drawer back
NOTE: Do not over
tighten the bolts
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the wood is finished with a protective clear lacquer.
B
pull
9 Fit drawer bottom into grooves of small drawer sides
and small drawer front as shown.
small
drawer bottom