Assembly Instruction

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
WELLS 3-DRAWER DRESSER
Made in Vietnam - r02 Page 3 of 5
left side
panel
drawer
crossbar
small drawer
left side
NOTE: Make
sure wheels are
at the back
small drawer
front
A
B
bottom panel
back
crossbar
front
crossbar
top panel
assembly
5 A) Fit dowels of top panel and top crossbar into
corresponding holes of left side panel. Secure all cams.
B) Fit dowels of front and back crossbars into
corresponding holes of left side panel. Secure all cams.
C) Fit dowels of bottom panel into corresponding holes
of left side panel. Secure all cams.
C
right side
panel
A
B
bottom panel
back
crossbar
front
crossbar
top panel
assembly
C
6 A) Fit dowels of top panel and top crossbar into
corresponding holes of right side panel. Secure all cams.
B) Fit dowels of front and back crossbars into
corresponding holes of right side panel. Secure all cams.
C) Fit dowels of bottom panel into corresponding holes
of right side panel. Secure all cams.
7 Attach 2 back panels to assembled unit with 36 small
screws as shown. Secure, but do not over tighten, the
screws using a phillips head screwdriver.
8 A) Attach small drawer left and right sides with 2
large screws as shown, using a screwdriver.
B) Insert 4 small wood dowels into drawer crossbar as
shown.
C) Fit dowels of drawer crossbar into corresponding
holes of small drawer front as shown.
NOTE: Do not over
tighten the screws
back panel
small drawer
right side
A
B
C