Assembly Instruction

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
WELLS 3-DRAWER DRESSER
Made in Vietnam - r02 Page 2 of 5
1 Insert 9 cam screws into left and right side panels as
shown. Secure, but do not over tighten, cam screws using a
phillips head screwdriver.
3 A) Insert 2 large wood dowels and 2 cams into back
and front crossbars as shown.
B) Insert 2 large wood dowels and 4 cams into top
crossbar as shown.
left and right
side panel
top
crossbar
A
B
2 A) Insert 4 large wood dowels, 2 cam screws and 6
cams into top panel as shown. Make sure arrows on each
cam point toward nearest edge with holes.
B) Insert 4 large wood dowels and 6 cams into bottom
panel as shown.
A
bottom
panel
B
top panel
4 Fit cam screws of top panel into cams of top
crossbar as shown. Using a screwdriver, turn each cam
clockwise until it securely engages each cam screw.
top
crossbar
NOTE: Make sure arrows
on each cam point toward
nearest edge with holes
back and front
crossbar
top panel