Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Wells Three-Drawer Chest with Media Hutch

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Vietnam - r02 Page 1 of 5

Thank you for purchasing the Wells 3-Drawer Dresser.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

WELLS 3-DRAWER DRESSER

Missing hardware? Please call 800.606.6387 for replacements.

20 - cam

screws

14 - large

wood dowels

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

36 - small

screws

24 - large

screws

1 - washer

6 - pull

bolts

3 - pulls

20 - cams

12 - small

wood dowels

WALL MOUNTING HARDWARE

1 - wall

strap

1 - screw

phillips head screwdriver

(We recommend the use of hand tools instead of power tools.)

1- top panel

2 - back panels

2 - drawer

fronts

1 - top

crossbar

3 - drawer

bottoms

2 - side panels

(1 right, 1 left)

1 - bottom

panel

2 - crossbars

(1 back, 1 front)

2 - drawer

backs

4 - drawer sides

(2 right, 2 left)

2 - small drawer sides

(1 right, 1 left)

1 - small

drawer back

1 - small

drawer front

3 - drawer

crossbars

Summary of content (7 pages)

PAGE 1
WELLS 3-DRAWER DRESSER HARDWARE 12 - small wood dowels 6 - pull bolts 14 - large wood dowels 36 - small screws 20 - cam screws 20 - cams 24 - large screws Missing hardware? Please call 800.606.6387 for replacements. WALL MOUNTING HARDWARE Thank you for purchasing the Wells 3-Drawer Dresser. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
WELLS 3-DRAWER DRESSER NOTE: Make sure arrows on each cam point toward nearest edge with holes A top panel left and right side panel B 1 Insert 9 cam screws into left and right side panels as shown. Secure, but do not over tighten, cam screws using a phillips head screwdriver. A bottom panel 2 A) Insert 4 large wood dowels, 2 cam screws and 6 cams into top panel as shown. Make sure arrows on each cam point toward nearest edge with holes.
PAGE 3
WELLS 3-DRAWER DRESSER A top panel assembly left side panel A top panel assembly B front crossbar B back crossbar C back crossbar front crossbar bottom panel C bottom panel 5 A) Fit dowels of top panel and top crossbar into corresponding holes of left side panel. Secure all cams. B) Fit dowels of front and back crossbars into corresponding holes of left side panel. Secure all cams. C) Fit dowels of bottom panel into corresponding holes of left side panel. Secure all cams.
PAGE 4
WELLS 3-DRAWER DRESSER NOTE: Do not over tighten the bolts pull B small drawer back A small drawer bottom 9 Fit drawer bottom into grooves of small drawer sides and small drawer front as shown. 10 A) Fit dowels of drawer crossbar into corresponding holes of small drawer back. Attach small drawer back to small drawer sides with 2 large screws as shown. B) Attach 1 pull to small drawer front with 2 pull bolts as shown. Secure, but do not over tighten, bolts with a screwdriver.
PAGE 5
WELLS 3-DRAWER DRESSER SAFETY MOUNTING INSTRUCTIONS For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A. Insert screw (included) and washer through end wall strap and into the top back of unit as shown. B. Insert wall screw (not included) through end of wall strap and into wall as shown.
PAGE 6
WELLS MEDIA HUTCH HARDWARE 1 - flat washer 1 - spring washer 12 - cams 10 - wood dowels 12 - cam screws 1 - bolt 4 - screws 2 - connecting plates Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Wells Media Hutch. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 7
WELLS MEDIA HUTCH NOTE: Do not over tighten the bolts B partition A partition C A back panel top panel B back panel 2 A) Fit 2 wood dowels and 2 cams into partition as shown. B) Fit 4 wood dowels and 6 cams into back panel as shown. 3 A) Fit dowels of back panel into corresponding holes of top panel. Using a screwdriver, turn each cam clockwise until it securely engages each cam screw. B) Fit dowels of partition into corresponding holes of top panel as shown. Secure cams.