Assembly Instruction

Made in Vietnam - r02 Page 5 of 6
WELLS 6-DRAWER DRESSER
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
11 A) Attach small drawer back to small drawer sides
with 2 large screws per side as shown.
B) Attach 1 pull to small drawer front with 2 pull bolts as
shown. Secure, but do not over tighten, bolts with a
screwdriver.
Repeat steps 9-11 for remaining small/large drawer
assemblies.
A
12 Fit drawer glides of drawer assemblies into
corresponding drawer glides of assembled unit as shown.
Assembly is now complete.
small
drawer back
B
pull
10 Fit drawer bottom into grooves of small drawer sides
and small drawer front as shown.
small
drawer bottom
small drawer
left side
NOTE: Make
sure wheels are
at the back
small drawer
front
9 Attach small drawer left and right sides to small
drawer front with 2 drawer screws per side as shown,
using a screwdriver.
small drawer
right side
large
drawer
assembly
small
drawer
assembly