Assembly Instruction

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
WELLS 6-DRAWER DRESSER
Made in Vietnam - r02 Page 3 of 6
A
B
bottom panel
top
crossbar
bottom
crossbar
top panel
assembly
5 A) Fit dowels of bottom panel into
corresponding holes of partition. Secure
bottom panel to partition with 2 partition
screws as shown, using an allen wrench.
Do not over tighten the screws.
B)Fit bottom crossbar into corresponding
notch of partition. Secure bottom crossbar
to partition with 1 screw as shown.
C) Fit top crossbar into corresponding notch
of partition. Secure top crossbar to
partition with 1 partition screw as shown.
C
6 Position unit as shown. Fit dowels of top
panel into corresponding holes of top
crossbar and partition. Secure all cams.
NOTE: Do not over
tighten the screws
top panel